2,000-3,000 Pcs/Hr Egg Tray Making Machine Price: What Affects the Cost?
A 2,000-3,000 pcs/hr egg tray making machine typically costs more than a small single-side machine but less than a large industrial 8-side or 12-side line. The final price depends on the forming model, drying system, fuel type, automation level, and shipping terms. Shuliy offers two main models in this range: the SL-3×4, producing 2,000-2,500 pieces per hour, and the SL-4×4, producing 2,500-3,000 pieces per hour.
Buyers searching for a 2,000-3,000 pcs/hr egg tray making machine price usually need a clear budget before approaching suppliers. This guide explains every cost factor so you can request an accurate quotation and avoid budget surprises.
Typical Price Range for 2,000-3,000 Pcs/Hr Egg Tray Machines
The price varies by configuration. Below is a general framework based on common setups.
| Configuration Level | Model | Hourly Output | Estimated Price Range (USD) |
|---|---|---|---|
| Basic with drying room | SL-3×4 | 2,000-2,500 pcs/h | 18,000-28,000 |
| Standard with brick dryer | SL-3×4 / SL-4×4 | 2,500-3,000 pcs/h | 28,000-45,000 |
| Advanced with metal dryer | SL-4×4 | 2,500-3,000 pcs/h | 35,000-55,000 |
| Fully automatic PLC line | SL-4×4 + auto stacking | 3.000 pcs/s | 45,000-65,000 |
The prices shown are for reference only and may vary based on raw material costs and machine configuration. Contact us for the latest and most accurate quotation.
6 Factors That Affect the Price
1. Forming Machine Model: SL-3×4 vs SL-4×4
The forming machine is the largest single cost component. The SL-3×4 has 12 forming molds arranged as 3 molds on each of 4 drum sides. The SL-4×4 has 16 molds arranged as 4 molds per side. The SL-4×4 produces 500 more trays per hour but uses more molds, a larger frame, and a heavier structure.
| Parametre | SL-3×4 | SL-4×4 |
|---|---|---|
| Çıktı | 2.500 pcs/s | 3.000 pcs/s |
| Forming molds | 12 pcs | 16 adet |
| Güç | 55 kW | 60 kW |
| Ağırlık | 4.000 kg | 4.800 kg |
| Size (L×W×H) | 2,900×1,800×1,800 mm | 3,250×1,800×1,800 mm |
The SL-4×4 typically adds 10-15% to the base machine cost compared with the SL-3×4.
2. Drying System Choice
The drying method has a major impact on total investment.
| Kuruma Sistemi | Fiyat Etkisi | En Uygun Olduğu | Kuruma Süresi |
|---|---|---|---|
| Natural sun drying | En düşük | Very small output, dry climate | 1-3 days |
| Multi-layer drying room | Low to medium | 2,000-3,000 pcs/h, humid regions | 45-90 minutes |
| Brick tunnel dryer | Orta | Continuous production, fuel flexibility | 15-30 minutes |
| Metal örgü bantlı kurutucu | Daha yüksek | Continuous production, limited space | 15-25 minutes |
A drying room is cheaper upfront. A brick dryer or metal dryer costs more but reduces labor and increases output consistency. Most commercial buyers at this capacity choose a brick dryer or metal dryer.
3. Fuel Type
The burner and heating system must match your local fuel supply.
- Electric heating: Simple installation but high running cost
- Natural gas burner: Clean and controllable, common in urban areas
- Diesel burner: Portable fuel supply, higher fuel cost
- Coal or wood firing: Lowest fuel cost in many rural areas, requires grate system
- LPG burner: Alternative where natural gas pipelines are unavailable
Coal and wood firing adds grate fabrication cost to the dryer. However, this option often pays back quickly in regions where solid fuel is cheap.
4. Automation Level
Basic machines use individual motor starters and temperature controllers. Upgraded systems add a PLC touchscreen, automatic tray counting, and remote monitoring capability.
| Automation Feature | Fiyat Etkisi | Benefit |
|---|---|---|
| Standard electrical panel | Base price | Manual control of each function |
| PLC touchscreen | +5-10% | Centralized control, easier operation |
| Auto tray stacker | +3-8% | Reduces labor at dryer outlet |
| Pneumatic baler | +2-5% | Compresses trays for transport |
| Remote monitoring module | +2-4% | Allows off-site troubleshooting |
For buyers planning to run two shifts, automation upgrades usually recover their cost through labor savings.
5. Mold Material and Quantity
Standard molds are made of plastic or aluminum. Aluminum molds last longer and produce sharper tray edges. They cost more upfront. Extra mold sets for egg cartons, fruit trays, or other products also add to the quotation.
| Mold Type | Lifespan | Price Level | En Uygun Olduğu |
|---|---|---|---|
| Plastik kalıp | 6-12 months | Daha düşük | Standart yumurta tepsileri |
| Alüminyum kalıp | 2-4 years | Daha yüksek | High-volume production, complex shapes |
6. Shipping and Destination
The forming machine, pulping system, and dryer ship in one or more containers. Freight cost depends on distance, container size, and port charges.
| Maliyet Kalemi | Typical Range |
|---|---|
| Ocean freight (per 40-ft container) | 1,500-4,000 |
| Import duty and VAT | 5%-20% of machine value |
| Customs clearance and inland transport | 500-2,000 |
| On-site installation support | 1,500-4,000 |
Buyers in landlocked countries or remote regions should budget more for inland transport.
What Is Usually Included in the Quotation?
Understanding the scope prevents hidden costs later.
| Ürün | Usually Included | Usually Extra |
|---|---|---|
| Forming machine with standard molds | Yes | |
| Pulping system (pulper, pump, agitator) | Yes | |
| Drying system structure | Yes | |
| Electrical control panel | Yes | |
| Pipelines and valves | Yes | |
| Operation manual and drawings | Yes | |
| Spare parts kit | Yes (basic) | |
| Ocean freight | Yes | |
| Import duties and taxes | Yes | |
| On-site installation engineer | Yes | |
| Extended warranty | Yes | |
| Extra mold sets | Yes | |
| Voltage conversion | Yes |
Price Comparison: Drying Room vs Brick Dryer vs Metal Dryer
At the 2,000-3,000 pcs/hr level, the drying choice shapes both price and operation.
| Factor | Kurutma Odası | Brick Dryer | Metal Dryer |
|---|---|---|---|
| Initial cost | Daha düşük | Orta | Daha yüksek |
| Labor needed | Daha yüksek | Daha düşük | En düşük |
| Output consistency | Weather-dependent | Stable | Stable |
| Fuel flexibility | Orta | Yüksek | Yüksek |
| Maintenance | Simple | Orta | Orta |
| Best for | Startups, humid areas | Commercial factories | Limited space, high output |
A drying room keeps initial investment low. A brick dryer lowers long-term operating cost. A metal dryer saves floor space and reduces drying time.
How to Get an Accurate Quotation in 4 Steps?
Suppliers cannot quote accurately without basic project information. Prepare these details:
Step 1: Define your output target
Specify whether you need 2,000, 2,500, or 3,000 pieces per hour. Explain your daily operating hours and target market.
Step 2: Choose your drying method
Decide between drying room, brick dryer, or metal dryer based on your climate, budget, and space.
Step 3: Confirm fuel and power
State your available fuel type and electrical voltage. Standard machines run on 380V / 50Hz three-phase.
Provide facility dimensions, ceiling height, and destination port. Include photos if possible.
Why the Cheapest Quote Is Not Always the Best?
A low price may hide important gaps. Watch for these warning signs:
- Unbranded electrical parts: Fail faster and are harder to replace locally
- Thin machine frame: Causes vibration and misalignment at high speed
- Missing dryer integration: Forming and dryer may not be properly matched
- No installation support: Leads to longer startup delays
- Limited mold options: Restricts product variety later
The total cost of ownership matters more than the initial purchase price. A reliable paper egg tray machine with good support usually delivers better long-term value.
Shuliy offers cost-effective egg tray machines backed by reliable quality, professional after-sales service, and technical support. Click the chat window on the right to contact us. Our sales team will get in touch with you within 24 hours and provide you with the most competitive quotation based on your requirements.
Sıkça Sorulan Sorular
Is a 2,000-3,000 pcs/hr machine suitable for beginners?
It depends on budget and market size. Buyers with confirmed sales of 30,000-50,000 trays per day can manage this capacity. Complete beginners with small farms may prefer the 1,000-1,500 pcs/hr single-side machine.
Can I upgrade from an SL-3×4 to an SL-4×4 later?
Partial upgrades are possible but rarely economical. The forming machine and molds usually need replacement together. It is better to choose a model with 20-30% capacity headroom from the start.
How much does shipping add to the total cost?
Shipping, duties, and inland transport typically add 25-40% to the ex-factory machine price. Landlocked destinations may reach 50%.
What payment terms are standard?
Most suppliers request 30% deposit and 70% balance before shipment. Some offer 50/50 terms for repeat customers.
Does the price include molds?
Yes, standard 49-cell egg tray molds are usually included. Extra molds for egg cartons, fruit trays, or other products are quoted separately.
How long does production take after ordering?
Production time is typically 25-40 days. Sea freight adds 20-40 days depending on destination.
Get a Customized Price Quote for Your Project
The 2,000-3,000 pcs/hr egg tray making machine price depends on your specific configuration. Shuliy’s SL-3×4 and SL-4×4 models cover this capacity range with flexible drying and fuel options.
Send us your target output, preferred drying method, fuel type, and destination country. We will recommend the right model and provide a detailed quotation within 24 hours.
Contact Shuliy today and get your customized egg tray machine price.
